X-PROG 3 Advanced Immobilizer & Key Programmer Compatible with Topdon Phoenix Pro/Plus & X-431 Series Diagnostic Scanner
£745.00 Original price was: £745.00.£630.00Current price is: £630.00.
Product Description
2. X-PROG 3 enables Anti-theft type identification, Remote control matching, Key chip reading & matching, anti-theft password reading and anti-theft component replacement.
3. Compatible with X-431 series diagnostic scanners, such as the X431 V, X431 V+, X431 Pad V, X431 Pad VII & Topdon Phoenix Pro/Plus
X-PROG 3 Advanced Immobilizer & Key Programmer
Highlights
2. X-PROG 3 enables reading/ writing EEPROM, on-board MCU and BMW CAS4+/ FEM chips, Mercedes-Benz infrared keys, generating special keys, reading BMW engine ISN code
3. Reads & writes most Engine/ Gearbox ECUs without disassembling the shell
4. Compatible with X-431 series diagnostic scanners, Compatible with: X-431 PRO GT, X-431 PRO V4.0, X-431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII & Topdon Phoenix Pro/Plus
6. Works with reprogramming device to backup/ restore programming data (For Bosch/ Siemens engine ECU).
Description:
X-PROG 3 advanced immobilizer & key programmer is a powerful chip reading device that can read/write keys to the vehicle. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables Anti-theft type identification, Remote control matching, Key chip reading & matching, anti-theft password reading and anti-theft component replacement.
X-PROG 3 Immobilizer and Key Programmer Tool is a chip reading device capable of EEPROM reading and writing as well as offers IMMO functionality, key programming, and other advanced features for North America, Asian, and European vehicles. Additionally, the X-PROG 3 is compatible to work with Launch scan tools to perform key and chip programming, such as the X-431 V, X-431 V+, X-431 Pad V, and more models.
12. Supports VW/ AUDI MQB platform engine ECU replacement or cloning (Read engine ECU data directly from the key).
13. Supports ECU replacement for the fifth-generation of Audi (0AW/0B5) gearbox.
14. Supports reading, writing & cloning the ECU for the fourth-generation of VW UDS engine.
15. Supports BMW E chassis 8HP gearbox ECU reprogramming to empty.
16. Works with reprogramming device to backup/ restore programming data (For Bosch/ Siemens engine ECU).
Support more than 1000 models, and keep updating…
Atmel | NSC |
Fujitsu | Philips |
Infineon | Renesas M16 |
MC68HC05 | Renesas M32 |
MC68HC08 | Renesas M32R |
MC68HC11 | Renesas R32C |
MC68HC12 | Renesas R8C |
MediaTek | Renesas V850 SPI |
MicroChip | Renesas V850 UART |
Nordic | Samsung |
ST | SiLabs |
Support EEPROM List:
Support more than 1000 models, and keep updating…
4Wire | GI | Numonyx | SST |
Adesto | GigaDevice | OKI | ST |
AKM | Grundig | ON Semi | Toshiba |
Altera | HOLTEK | Other | Winbond |
Amic | Hynix | PCT | Xicor |
Atmel | I2C | Philips | xUSSR |
BOSCH | ITT | Pioneer | YMC |
Catalyst | KHIC | PMC | Spansion |
Chingis | Macronix | Ramtron | SPI |
Dallas/Maxim | MicroChip | Rohm | NEC |
EON | Micron | Samsung | NSC |
ESMT | MicroWire | Seiko | Ford |
EXEL | Mitsubishi | Siemens | Fujitsu |
Fairchild | Motorola | Sony |
X-Prog vs X-Prog 3
Item Name | X-prog | X-Prog 3 |
EEPROM Read and Write | × | √ |
MCU Read and Write | × | √ |
Mercedes Benz Key | × | √ |
Key Simulator | × | √ |
VW 4th instrument disassembly/reading/all lost | × | √ |
Read Engine via Bench Mode | × | √ |
Read Engine via Boot Mode | × | √ |
VW 4th All Key Lost without Account | × | √ |
Read Gearbox | × | √ |
Read and Write Key | √ | √ |
Read BMW ISN | × | √ |
Read CAS4+/FEM Chip | × | √ |
Audi 5th generation steering column chip reading and writing | × | √ |
Replace OBD Reading Component | √ | √ |
XPROG3 Operation Connection:
Connection method 1: Directly connect to OBD16 for key matching, data reading and writing, etc
Connection method 2: Place the anti-theft EEPROM or MCU chip in the chip burning socket, and then insert the chip burning socket into the slot of the immobilizer programmer locker and lock it to realize the data interaction between the IC anti-theft chip and the diagnostic host
Connection method 3: After removing the ECU from the car, connect the anti-theft ECU pin to the DIY slot of the immobilizer programmer through the cable to realize the data interaction between the anti-theft ECU and the diagnostic host.
XPROG3 Specification
Interface | DB26, DB15 |
Input Power | DC12V |
Working CurrentMax | 500mA |
Power Consumption | 5W |
Storage Temperature | -20℃~70℃ |
Working Temperature | 0℃~50℃ |
Size | 228*120 mm |